技術參數Technical parameters
用于有功功率的和越限繼電器輸出。For active power measurement and over over limit relay output.
指示精度Accuracy: Class 1.5。
環境溫度Ambient temperature range：-25℃ to +55℃。
外殼防護Housing protection：IP44。
耐振動Vibration resistance：2-100HZ≤0.7g。
耐電壓Dielectric test：AC2.6KV，50HZ，1min。
設置點參數Set point: 25～125%×Pn(Pn:滿度值Full scale value);時間延遲Time delay: 0～20S.
規格參數及測量范圍 Specification parameter and Measuring range:同as F96-W
電源功耗Power:Consumption :≤3VA
輸出觸點容量Contact rating：AC250V ，3A；DC28V，3A.
產品分類 Kind of products
型號 Type | 展開角 angle | 外形尺寸（mm） Outline（AXBXC） | 開孔尺寸 Cut-out（mm） | 結構代碼 Structure code | 外形圖 Outline drawing | 接線圖 Wiring drawing | 重量（Kg） Weight |
F96B-WB，Q96-WTCAA，51L6 | 90° | 96X96X102 | 92+0.5X92+0.5 | A | 圖Figure 1 | 圖Figure 3 | 0.75 |
F96B-W，Q96-WTCZAA，51L5 | 240° | 96X96X102 | 92+0.5X92+0.5 | B | 圖Figure 2 | 圖Figure 3 | 0.95 |
外形圖 Outline drawing
接線圖Wiring diagram
使用說明Directions
使用前應檢查儀表接線正確無誤，輸入電壓、電流規格應與銘牌標識相符。Before use,the instrument wiring should be checked correctly,and the input voltage and current specifications should be consistent with the nameplate identification.
儀表接線端子排列見圖3。The instrument terminal arrangement is shown in figure 3.
當接通電源后，綠色指示燈亮，表示儀表處于工作狀態。When power supply is switched on,green LED for indication “power on”is lit,which indicates devise is running correctly.
當功率超過設置點時，黃色指示燈（P>）點亮，經過所設置的時間延遲，紅色指示燈（RELAY）點亮，表示繼電器已發生動作而改變狀態。When set point for power has been exceeded,“P>”yellow LED is lit,and after time expired,red LED is lit and alarm contact is activated.
特殊用途儀表請在型號前半部的數字后加“J”（僅限于240°儀表），如F96JB-W。Specify“J”for special meter.(Only for Pointer deflection 240 degree meter)as:F96JB-W.
